bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Land Rover


  • Will the Spare Tire Still fit on a 2008 Land Rover Range Rover Sport with a Curt Hitch Installed
  • As long as your spare is not a full size spare that is the same size as the wheels and tires on your 2008 Land Rover Range Rover Sport then it will still mount in the factory location. If it is a full size spare then it will not fit and the only recommendation I can make for you would be to try and track down a smaller spare.
    view full answer...

  • Recommended Bike Rack For A Pedego Stretch Bike With 50 Wheelbase
  • For your Pedego Stretch electric bike I recommend the the Yakima OnRamp Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount # Y36FR has a maximum wheelbase of 50" and weight capacity of 66lbs per bike but drops down to 40lbs if you're hauling off-road or by RV.
    view full answer...

  • Custom Fit Hitch Receiver and Wiring Harness for 2018 Land Rover Discovery
  • Yes, the Stealth Hitches Hidden Rack Receiver item # SH63MR is a confirmed fit for your 2018 Land Rover Discovery. This is a custom fit receiver and when not in use completely hides the hitch. Keep in mind this receiver is only for carrying accessories so if you plan to tow a trailer you will need the towing kit with ball mount and trailer wiring harness item # SH99FR for your Stealth Hitches hitch receiver. This kit comes with a 2" ball and all necessary equipment to run your trailers...
    view full answer...

  • Will Curt Trailer Hitch Fit 2021 Range Rover Sport With Full Size Spare In Cargo Area
  • Yes, the Curt trailer hitch will absolutely fit your 2021 Range Rover Sport with a full-size spare tire in the floor of the cargo area; the correct hitch is the following: - Curt Trailer Hitch Receiver # C13243 The only issues in regards to a full-size spare on a '21 Range Rover Sport is if it was mounted underneath the vehicle. Even then, the hitch would still fit but the spare would have to be stored elsewhere. But since your full-size spare is stored in your cargo area you will be...
    view full answer...

  • Does Curt T-Connector C56293 For 2018 Land Rover Range Rover Sport Require Factory Tow Package?
  • The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56293 you were looking at for your 2018 Land Rover Range Rover Sport Supercharged is designed for vehicles with the factory tow package. If you do not have the factory tow package then you will need to take your vehicle to your local Land Rover dealer and have them install the necessary components to activate the tow package. I included a video of the # C56293 for you to take a look at.
    view full answer...

  • Roof Rack and Roof Box Compatibility with Range Rover Sport with Naked Roof
  • There are a couple options for you. The first option is the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars - Aluminum - Black # RR94XR. A second option is the roof rack consisting of part numbers: # RRVA150B-2, # RRRLKVA, and # DK408. With either option, the custom fit kit clips you are referring to will absolutely not be an issue for your loaded roof box at highway speeds as long as you don't overload the rating of the system itself. Each of these options are...
    view full answer...

  • Trailer Hitch for a 2020 Land Rover Range Rover Sport HSE
  • We do have a hitch that's custom made for your 2020 Land Rover Range Rover Sport HSE. It's the Draw-Tite Class III, part # 75229. This hitch has a 2" receiver with a gross tongue weight of 800 lbs and a gross towing weight of 8000 lbs. There will be some trimming that is required on your under panel. I've linked to a video installation of this hitch for you to review.
    view full answer...

  • Stealth Hitches Trailer Hitch Receiver and Wiring For a Full Size 2019 Land Rover Range Rover V8
  • Yes, the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH46GR is confirmed to fit your full size 2019 Land Rover Range Rover with the V8 engine. The removable receiver and ball mount allow you to maintain your factory appearance. I do recommend getting a Carrying Case # 391CASEC to store the ball mount, receiver and the 7-way to 4-flat adapter.
    view full answer...

  • Will Hopkins Adapter 7-Way Round Pin To 4-Way Flat # 47405 Fit a 2001 Land Rover Discovery II
  • The trailer wiring adapters are not vehicle specific. They are universal and will be matched by what type of connector is on the tow vehicle and what type of connector is on the trailer. The Hopkins Adapter 7-Way Round Pin To 4-Way Flat, part # 47405, is for a vehicle that has a 7-Way round pin connector and you are connecting to a trailer with a 4-Way flat connector. The 7-Way blade style connectors are more common than the 7-Way round pin connectors. I would check the 7-Way connector...
    view full answer...

  • Lock For Original Kuat Transfer Bike Rack
  • There is an option for a hitch lock for the original (manufactured before 2021) Kuat Transfer bike rack that you can use other than the Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks # HLT. The other option is a cable and hitch lock combination, with the hitch lock securing to the Transfer's existing hitch pin, and there is an option for 2 cable locks and a hitch lock, or 1 cable lock and a hitch lock: - 1 Cable Lock: Cable Lock and Hitch Lock for Kuat Transfer # # ATSCLK11011 -...
    view full answer...

  • Recommended Wind Fairing for a Rhino-Rack Pioneer Platform Rack Part # RR75TB
  • I do have an option for you but we currently do not offer the Pioneer Wind Fairing part RR43251 as of May 2018. However, I called my contact at Rhino Rack and they were able to confirm that the Rhino-Rack Fairing for Roof Racks part # RRRF4 will still work for your Rhino-Rack Pioneer Platform Rack part # RR75TB. The only major difference is length. The wind fairing part RR43251 is 2" longer than the wind fairing part # RRRF4.
    view full answer...

  • Will the C59496 Trailer Taillight Wiring Harness Work on a 2008 Land Rover LR2
  • The Curt # C59496 wiring harness is a universal-fit item that will work on any vehicle with a 12V wiring system, so it'll work great on your Land Rover LR2. You will need to use the included circuit tester to locate the brake light circuit behind the vehicle tail light. Once this circuit is located it will be connected to the smaller red wire coming from the converter box. Next, locate the left turn signal circuit and connect the yellow wire to that circuit. The green wire is then ran...
    view full answer...

  • 2018 Crossroads Sunset Trail Super Lite Camper Bumper Rating and Trailer Hitch Receiver
  • For your 2018 Crossroads Sunset Trail Super Lite Camper the rating for bumpers with an attached hitch is 125lbs. If it doesn't already have a hitch attached then it is not recommended to attach anything to the bumper. I recommend instead attaching the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide Item # 13703 as it is a universal fit and can hold 350lbs and pull 3500lbs. I've attached a video that offers additional information and goes over installation.
    view full answer...

  • Roof Rack for 2008 Land Rover Range Rover Sport With Naked Roof to Carry SUPs
  • The best value for a roof rack for your 2008 Land Rover Range Rover Sport with a naked roof to carry your SUPs is going to be from Inno because it gives you a high-quality aerodynamic rack at a price that is less than other recognizable brands. The parts you need are the following: - Inno Aero Crossbars # INXB153-2 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK766 Then to carry either 1 or 2 SUPs I highly recommend the Inno Locker Watersport Carrier # INXA445. The...
    view full answer...

  • Will a Pullrite SuperGlide 5th Wheel Trailer Hitch Fit the Reese Adapter # RP30156
  • There is more than one version of the Pullrite SuperGlide 5th wheel trailer hitch. If it is the one that states it is an ISR (stands for industry standard rails) then it is possible that it will fit Reese adapter # RP30156. The distance between the mounting feet of the hitch will have to be either 20-1/2 inches apart on center or 29 inches apart on center, side to side. And they will have to 22 inches apart on center front to back.
    view full answer...

  • Recommended Trailer Hitch And 4-Bike Carrier For 2011 Land Rover LR2
  • The Draw-Tite trailer hitch, part # 75688 will work great on your LR2. This is a Class lll trailer hitch and it has a 2 inch receiver opening. For hitch-mounted bike carriers I recommend a platform-style carrier. These are easier to load and unload and they provide a sturdy way to hole the bikes in place. One of the bike racks I recommend is the Swagman XTC4 4-Bike Rack, part # S64665. This has adjustable wheel hoops that will accommodate 4 bikes with a wheelbase range from 27-1/2 to...
    view full answer...

  • Why Is The Curt Receiver # C13243 Not Rated For Weight Distribution On 2015 Range Rover Sport?
  • It appears Land Rover does not certify the chassis under your 2015 Range Rover Sport for use with a Weight Distribution Hitch. This explains why Curt does not certify their Receiver # C13243 for a weight distribution weight since they cannot test it on the vehicle.
    view full answer...

  • Recommended Hitch and Platform Bike Carrier to Use on 2014 Land Rover Evoque
  • I'll start off by saying that the first thing you need is a hitch receiver on your vehicle in order to carry the bike rack. I recommend using the Curt Trailer Hitch Receiver # C13128 which will provide you with a durable hitch to carry any potential bike rack. This hitch has a 2" receiver on it which will provide you with a greater variety of hitch mounted accessories that can be used. When it comes to a bike rack, your choice of going with a platform rack is a good start considering...
    view full answer...

  • Best Trailer Wiring Harness for a 2018 Land Rover Evoque HSE Dynamic
  • For your 2018 Land Rover Evoque HSE Dynamic, I recommend using the ZCI Circuit Protected Vehicle Wiring Harness part # 119250KIT which is going to be the only confirmed option we have for you that does not require splicing into the vehicle's tail lights. The Curt T-Connector Vehicle Wiring Harness part # C56159 is not a confirmed fit. I understand the preferred method for you would be the inexpensive plug and play wiring harness but unfortunately that is not an option for your vehicle...
    view full answer...

  • Highest Rated Trailer Hitch Receiver For 2016 Land Rover Discovery Sport
  • You are not missing anything at all; I did double check with the hitch manufacturers, and the highest-rated trailer hitch receiver for your 2016 Land Rover Discovery Sport is indeed the 4,500 lb capacity Curt Trailer Hitch Receiver # C13396. Also please keep in mind the Curt # C13396 is only a fit for a '16 Discovery Sport without 5+2 seating.
    view full answer...